RAC-800/900 Access Control Terminal





Stand-alone or On-Line(1~255 terminals) application.
Built-in RS-232/485 can be connected with a Modem 或 TCP / IP Converter.
128KB memory can store up to 2048 Card Holders and 4096 Events.  
8 Time Period Groups for programming Access Control.  
Duress Card or PIN for opening a door under duress.  
Patrol Card and Visitor Card setting.  
Connecting to a modem or auto dialer emergent message can be directed to central management center.  
Master Card for direct function setting on terminals.  
Display Card Holder Name.  
Modes for opening a door: Card, PIN, or Card+PIN.
With built-in Case Sensor and can be connected to a Door Sensor.  
Memory-full auto warning (while 90% full). System will stop accepting card input when the memory is full(under Time Attendance mode).
Can connect different kinds of sensors for security applications.
Built-in Real Time Clock IC(RTC)
Anti-pass-back function.
Barcode reader   Infra red: resolution 0.15mm, speed: 100~1000mm/sec.
Magnetic reader   ISO Standard Track:T1,T2,T3 speed: 3~40ips
RF reader   Wiegand 26 bit, EM 125 KHz
Sensor input   2 Sensor (Push button, Door sensor)
Relay output   2 Relay (Door lock; Alarm)
Indicator   LCD display
Key   15 keys
Beep Tone   Buzzer
Memory   128K
Comm. interface   RS-232, RS-422, RS-485
Power in   DC 12V~25V @ 500mA
Power consumption   5W (max)
Baud rate   9600bps-N-8-1
Operating Temperature   0℃~50℃ / 32℉~122℉
Operating Humidity   20%~95% (non-condensing)
Measurement   153mm(L) x 120mm(W) x 60mm(H)
Weight   450g